Speed Dialing - Sena SMH10 User Manual

Note:
If you are using a multipoint mobile phone connection and you have an incoming call from the second
phone during the call of the first phone, then you may still receive the call from second phone. In this case,
the call from the first phone is in waiting mode. If you end a call, then it will automatically guide you to the
first phone call.

8.2 Speed Dialing

You can quickly make a phone call by using the voice speed dial menu.
1. To enter into the voice speed dial menu, press and hold the (+) Button for 3 seconds and you will
hear a mid-toned single beep and a voice prompt saying "Speed dial".
2. Tap the (+) Button or the (-) Button to navigate between the menus. You will hear voice prompts for
each menu items.
3. Tap the Center Button to select a voice menu among the followings:
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
(4) Speed dial 3
(5) Cancel
4. After selecting the last number redial menu, you will hear a voice prompt saying "Last number
redial". Then, to redial the last phone call number, tap the Center Button.
5. To call one of the speed dials, tap the (+) Button or the (-) Button to navigate between the menus
until you hear a voice prompt saying "Speed dial (#)". Then, tap the Center Button.
6. If you want to exit the speed dial immediately, tap the (+) Button or the (-) Button until you hear a
voice prompt saying "Cancel", and tap the Center Button. If any button is not pressed within 15
seconds, the Bluetooth Mic will exit the voice speed dial menu and goes back to stand-by mode.
7. To cancel the voice dialing or redialing last number command, tap the Center Button while it is in
progress.
Note:
Make sure that you should connect the mobile phone and the Bluetooth Mic in order to use the speed dial
function.
Tap the Center Button or Say "Hello"
| Bluetooth Mic & Intercom
Answer