Powering On/Off; Voice Prompt; Volume Adjustment - Sena SMH10 User Manual

Hide thumbs Also See for SMH10:
Table of Contents

Advertisement

Note:
You can control all the functions of the Bluetooth Mic by your
an Android phone.
You can play/pause the music, or start/end the intercom by your
for an iPhone.

3.3 Powering On/Off

To power on the Bluetooth Mic, slide the Power Switch to on. The Blue and Red LEDs will turn on. To
power off, slide the Power Switch to off.

3.4 Voice Prompt

On the Bluetooth Mic, the voice prompt works as an essential feedback from your operation. Since the
Bluetooth Mic does not have built-in speakers, you must use headphones to hear the voice prompts. You
can hear voice messages and voice prompts when you operate the Bluetooth Mic such as when putting
the Bluetooth Mic into pairing mode or entering the "Configuration menu". It is strongly recommended for
you to use headphones to proplerly set up the system.

3.5 Volume Adjustment

You can easily adjust the volume by tapping the (+) Button or the (-) Button. You will hear a beep when
the volume reaches maximum or minimum level. The volume is set and maintained independently at
different levels for each audio source even when you turn off and on the Bluetooth Mict. For example,
once you set the volume for a
paired mobile
phone, it will not change even if you adjust the volume when
| Bluetooth Mic & Intercom
headphones
if it has the controller for
headphones
if it has the controller

Advertisement

Table of Contents
loading

Table of Contents