Table of Contents
Advertisement
Result
Disconnect (B), (C) & (D)
Disconnect (B)
Disconnect (C) & (D)
End Four-way Intercom
9.6 Intercom Failure
When you try to start an intercom conversation with an intercom friend who is already having a
conference intercom with other riders or a mobile phone call, you will hear a low toned double beep
signifying an intercom busy signal. In this case, you have to try again later.
9.7 Intercom Reconnection
If your intercom friend goes out of range while having an intercom conversation, you may hear static
noise and eventually the intercom will be disconnected. In this case, the Bluetooth Mic automatically tries
to reconnect the intercom every 8 seconds and you will hear high tone double beeps until the intercom is
reestablished. If you don't want to make a reconnection, tap the Center Button to stop the attempt.
10. UNIVERSAL INTERCOM
You can have an intercom conversation with non-Sena Bluetooth headsets using the Universal Intercom
function. Non-Sena Bluetooth headsets can be connected to the Bluetooth Mic if they support the
Bluetooth Hands-Free Profile (HFP). The working distance may differ depending on the performance of
Bluetooth headset that it is connected to. In general, it is shorter than normal intercom distance since it
uses the Bluetooth Hands-Free Profile.
10.1 Universal Intercom Pairing
The Bluetooth Mic can be paired with non-Sena Bluetooth headsets for Bluetooth intercom conversation.
1. Turn on the Bluetooth Mic and a non-Sena Bluetooth headset which you want to pair with.
2. Press and hold the Center Button on the Bluetooth Mic for 8 seconds until the blue LED flashes
rapidly. You will hear a voice prompt saying "Universal intercom pairing".
| Bluetooth Mic & Intercom
Center Button
Press for 1"
Single tap
Double tap
Advertisement
Table of Contents
