Bluetooth Stereo Device Pairing; Pairing With The Bluetooth Pack For Gopro Or Prism; Pairing With Selective Profile: Hfp Or A2Dp Stereo - Sena SMH10 User Manual

2. Double tap the (+) Button then
"Multipoint pairing".
3. If you want to pair a second mobile phone, search for the Bluetooth device on your mobile phone, and
select the Sena Bluetooth Mic in the list of the devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
5. The mobile phone confirms that pairing has completed and the Bluetooth Mic is ready to use. You will
hear a voice prompt, "Your headset is paired".

5.3 Bluetooth Stereo Device Pairing

If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don't need to
pair the Bluetooth Mic with it separately. When the Bluetooth Mic is paired with the mobile phone, it is
also paired as a stereo music device.
If you have a stand alone Bluetooth stereo device, follow the pairing procedure separately. The procedure
is the same as the procedure of "5.1 Mobile Phone Pairing".
Note:
1. If a Bluetooth connection between the Bluetooth Mic and a mobile phone is disconnected, press the
Center Button for 3 seconds until you hear a high toned single beep to recover the Bluetooth
connection immediately.
2. If a Bluetooth connection between the Bluetooth Mic and a media player is disconnected, press the
Center Button for 1 second to recover the Bluetooth connection and play.
5.4 Pairing with the Bluetooth Pack for GoPro
The Bluetooth Mic can be paired with the Bluetooth Audio Pack for GoPro
recording.
1. Turn on the Bluetooth Mic and the Bluetooth Audio Pack or Prism which you want to pair with.
2. Press and hold the Center Button for 5 seconds on the Bluetooth Mic, then
rapidly and you will hear a mid-toned single beep and the voice prompt, "Intercom pairing".
3. Perform the operation required for pairing on the Bluetooth Audio Pack or Prism (refer to the Users'
Guide). The Bluetooth Mic will automatically perform pairing with Bluetooth Audio Pack or Prism in
pairing mode.
6. PAIRING WITH SELECTIVE PROFILE: HFP OR A2DP
the blue LED flashes rapidly and
®
or PRISM
| Bluetooth Mic & Intercom
you will hear voice prompt,
®
or PRISM for Bluetooth voice
the red LED flashes