Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sena EXPAND
Summary of Contents for Sena EXPAND
- Page 1 SENA EXPAND ® Bluetooth Stereo Headset & Intercom User's Guide www.sena.com...
- Page 2 Sena. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Sena is ® under license. Other trademarks and tradenames are those of their respective owners.
-
Page 3: Table Of Contents
4.5 Assigning Speed Dial ........13 9. INTERCOM ............22 4.6 Enabling/Disabling Voice Prompts ..... 14 9.1 Pairing with Other Sena Expand Headsets for 4.7 Delete All Bluetooth Pairing Information .... 14 Intercom Conversation ........22 4.8 Reset to Factory Default Setting ......14 9.2 Pairing with Other Sena Headset Models for... - Page 4 • Return for Full Refund ..........45 11.2 Two-way Universal Intercom ......30 11.3 Three-way Universal Intercom ......31 11.4 Four-way Universal Intercom......32 12. FIRMWARE UPGRADE ........34 13. SENA BLUETOOTH CONNECTION CASE STUDIES ............... 35 Case 1 ..............35 Case 2 ..............
-
Page 5: Introduction
• Long-range Bluetooth intercom up to 300 meters (330 yards)* specifically for outdoor sports activities. With the • Four-way conference intercom Sena Expand, you can listen to stereo music, call • Universal Intercom™ handsfree on their Bluetooth mobile phone, and • Multipoint Bluetooth for dual mobile phone have intercom conversations in full duplex with up • Crystal clear and natural sound quality... -
Page 6: Package Contents
EXPAND 2. PACKAGE CONTENTS • Headset Status LED Center Button • Play and pause Bluetooth stereo device • Answer and end a mobile phone call (+) Button / (-) Button • Reject an incoming mobile phone call • Volume adjustment •... -
Page 7: Getting Started
EXPAND 3. GETTING STARTED 3.1 Wearing the Sena Expand Proper fit on your ear and head is important both for comfort and optimal noise-reduction performance. The speaker with microphone should be placed USB Power & Data Cable on the left ear. Then you can place earhooks over ears and pull the microphone in toward your lips as positioning the microphone with its talk side facing in as shown below. -
Page 8: Installing The Microphone Windscreen
EXPAND 3.2 Installing the Microphone Windscreen 3.4 Powering Off The microphone windscreen helps you to cut down Press the Center Button and the (+) Button incoming microphone wind noise by protecting simultaneously (you don’t need to press and hold in the microphone from the wind and provide clearer order for the system to power off). -
Page 9: Function Priority
EXPAND 3.6 Function Priority 3.7 Charging The Sena Expand operates in the following order of The charging LED beside the charging port turns red priority: while charging, and turns to blue when the headset is fully charged. It takes about 2.5 hours to be (highest) Mobile phone, completely charged. -
Page 10: Low Battery Warning
3.10 Fault Reset When the battery is low, the blinking blue LED in When the Sena Expand is not working properly or stand-by mode turns to red and you will hear mid- is faulty for any reason, you may reset it by pushing tone triple beeps and a voice prompt, “Low battery”. -
Page 11: Configuration Setting
2. Insert a paper clip into the reset pin-hole and 4. CONFIGURATION SETTING press the reset button for a second using light pressure. The Sena Expand will be switched off, and you have to turn the system back on and try You can set the configuration of the Sena Expand by again. -
Page 12: Mobile Phone Pairing
EXPAND 4.2 Multipoint Pairing The voice prompt for each menu item is as follows: (1) Phone pairing (6) Voice prompt Voice Prompt “Multipoint pairing” (2) Multipoint pairing (7) Delete all pairings Factory Default (3) Phone selective pairing (8) Factory reset... -
Page 13: Media Selective Pairing
“Cancel”. If any button is not pairing. If you press the (+) or (-) Button, you can exit pressed within 1 minute, the Sena Expand will exit from the media selective pairing mode. the configuration menu and go back to stand-by 4.5 Assigning Speed Dial... -
Page 14: Enabling/Disabling Voice Prompts
To restore factory default settings on the Sena You can disable voice prompts by configuration Expand, press the (+) Button or the (-) Button until setting, but the following voice prompts are always you hear the voice prompt, “Factory reset”. Press the - Voice prompts for configuration setting menu Center Button to confirm. The Sena Expand powers... -
Page 15: Pairing The Expand With Bluetooth Devices
(-) Button BLUETOOTH DEVICES Phone Pairing None Multipoint Pairing None Before using the Sena Expand headset with any Phone Selective Pairing None Bluetooth device for the first time, you need to do Media Selective Pairing None the pairing operation. It can be paired with Bluetooth... -
Page 16: Mobile Phone Pairing
PIN. 5. The mobile phone confirms that pairing has completed 5. The mobile phone confirms that pairing has and the Sena Expand is ready to use. You will hear the completed and the Sena Expand is ready to use. voice prompt, “Your headset is paired”. -
Page 17: Bluetooth Stereo Device Pairing
The Sena SR10 is a Bluetooth two-way radio adapter for group communication. If you pair the Sena Expand with an SR10 by multipoint pairing, the Sena Expand is able to have two HFP devices at the same time: a mobile phone and the Sena SR10. -
Page 18: Pairing With Selective Profile: Hfp Or A2Dp Stereo
SR10 list on both devices; the mobile phone and the Sena Expand. To clear the pairing list on the Sena Expand Parallel Connection of SR10 and Mobile Phone by , please do a factory reset or follow the pairing list Bluetooth Multipoint Pairing clearing procedure described in this user's guide. -
Page 19: Phone Selective Pairing: Hfp For Phone Call Only
“Configuration menu”. wireless audio device. The Bluetooth audio device 2. Press the (+) Button three times and you will hear must be paired with the Sena Expand by following the voice prompt, “Phone selective pairing”. the “Bluetooth Stereo Device Pairing” procedures 3. -
Page 20: Mobile Phone Call Making And Answering
Center Button while it is in progress. ANSWERING If you have a second mobile phone connected with the Sena Expand by multipoint connection, you can 8.1 Mobile Phone Call Making and answer the incoming call to the second mobile phone Answering by pressing the Center Button while you are on the 1. - Page 21 “Cancel”, and tap the Center Button. If any button is not pressed within 15 seconds, the Sena Expand will exit the voice speed dial menu and goes back to stand-by mode. 7. To cancel the voice dialing or redialing last number command, tap the Center Button while it is in progress.
-
Page 22: Intercom
The Sena Expand can be paired with up to three other headsets for Bluetooth intercom conversation. 1. Turn on the two Sena Expand headsets (A and B) Pairing A & B that you would like to pair with each other. -
Page 23: Pairing With Other Sena Headset Models For Intercom Conversation
Press once Press twice Models for Intercom Conversation intercom times The Sena Expand can be paired with all other Sena Press once headset models for intercom conversation. Please intercom follow the same procedure as above to pair with Start & End Two-way Intercom... - Page 24 Center Button. When As described in 5.4 of this user's guide, you can you hang up the phone call, the intercom will use a two-way radio and Sena Expand Bluetooth automatically be recovered. intercom simultaneously by using the Sena SR10, b.
-
Page 25: Three-Way Intercom
9.4 Three-way Intercom 9.4.1 Start Three-way Intercom You (A) can have a three-way conference intercom with two other Sena Expand friends (B & C) by establishing two intercom connections at the same Mobile Phone time. While a three-way conference intercom is in... - Page 26 Second Friend Second Friend 2. Start an intercom conversation with one of the 4. Now you (A) and two Sena Expand intercom two friends in your intercom group. For example, friends (B & C) are having a three-way conference you (A) may start an intercom conversation with intercom.
- Page 27 EXPAND 9.4.2 End Three-way Intercom 9.4.3 Three-way conference phone call with When you are a member of an active three-way intercom participants conference intercom, you can completely terminate You can have a three-way conference phone call the conference intercom or just disconnect an intercom by adding an intercom friend to the mobile phone connection with one of your active intercom friends.
-
Page 28: Four-Way Intercom
You can have four-way conference intercom with intercom or just disconnect a single intercom three other Sena Expand users by adding one more connection. intercom participant to the three-way intercom. While you are having three-way intercom as above 1. -
Page 29: Intercom Failure
GPS during music sharing, the function will be paused. 3. In order to share music, make sure that you update both headsets with the firmware that has the music sharing feature, and enable the EDR setting in the Sena Device Manager. -
Page 30: Universal Intercom
Universal Intercom connection, activating the voice dialing or using the redialing operation. You may also 1. Turn on the Sena Expand and a non-Sena disconnect the existing connection by ending a call Bluetooth headset which you want to pair with. -
Page 31: Three-Way Universal Intercom
3. The other Sena Expand (C) may join the intercom 1. You (A) need to be paired with non-Sena Bluetooth by making an intercom call to you (A). -
Page 32: Four-Way Universal Intercom
(A), a non-Sena Bluetooth headset (B), and 4. Now you (A), non-Sena Bluetooth headset (B), and two other Sena Expands (C and D). You may make the other Sena Expand (C) are having a three-way the four-way Universal Intercom call the same way as conference intercom. - Page 33 Bluetooth Mic (C). Bluetooth headset (B). The procedure is the same as the case 1 described in section 11.4.1. 4. Now two Sena Expands (A & C) and two non-Sena Bluetooth headsets (B & D) are connected with the four-way Universal Intercom.
-
Page 34: Firmware Upgrade
Please visit the Sena Bluetooth web site Intercom. at www.sena.com to check the latest software - If the non-Sena headset (that has been paired to the Sena headset) is powered on and is automatically connected, then the multipoint downloads. -
Page 35: Sena Bluetooth Connection Case Studies
EXPAND Case 2 13. SENA BLUETOOTH CONNECTION • Mobile phone calls • MP3 Player for stereo music streaming CASE STUDIES • Two other Sena Expand for three-way conference intercom Case 1 • Mobile phone calls and stereo music streaming • Sena Expand for two-way intercom Mobile Phone Mobile Phone Pairing Mobile Phone Mobile Phone Pairing Intercom Mobile Phone Pairing Pairing Intercom Intercom... -
Page 36: Case 3
EXPAND Case 3 14. OPERATION QUICK REFERENCE • Mobile phone calls and stereo music streaming • Sena SR10 for two-way radio and radar detector alarm • Sena Expand for two-way intercom Type Description Button Duration Center Button Power-on 1 sec Sollid blue & (+) Button Basic Center Button Power-off 1 press Solid red Mobile Phone Function & (+) Button Two-way radio... -
Page 37: Certification And Safety Approvals
EXPAND CERTIFICATION AND SAFETY APPROVALS Type Description Button Duration FCC Compliance Statement Center Button 5 sec flashing Intercom This device complies with part 15 of the FCC rules. Pairing Center Button of any one of the two Operation is subject to the following two conditions:... -
Page 38: Fcc Rf Exposure Statement
• Increase the separation between the equipment This product is CE marked according to the provisions and the receiver of the R&TTE Directive (99/5/EC). Hereby, Sena • Connect the equipment into an outlet on a declares that this product is in compliance with the... -
Page 39: Bluetooth License
The Bluetooth word mark and logos are owned by the Equipment) Bluetooth SIG, Inc. and any use of such marks by Sena The crossed-out wheel bin symbol on is under license. Other trademarks and trade names the product, literature, or packaging are those of their respective owners. -
Page 40: Safety Information
EXPAND SAFETY INFORMATION Product Use • In some regions, it is prohibited by law to ride Please ensure that the product is properly used by motorcycles or bicycles while wearing headsets. observing the warnings and cautions below to prevent Therefore be certain to comply with all relevant laws any risk and/or damage to property. -
Page 41: Battery
EXPAND • In recharging the battery, make sure to use an • Do not use the product near hazardous explosives. approved charger provided by the manufacturer. When there are near any explosion hazards, turn off Use of a non-approved charger may cause fire, the power and heed any regulations, instructions, explosion, leakage, and other hazards may also and signs in the area. -
Page 42: Product Warranty And Disclaimer
Here, product warranty extends to considerable legal rights including any claim for the product only. Sena will not be liable for any loss, compensation for damages. Therefore, be certain to damage of human life, or loss of property which may... -
Page 43: Warranty Exclusions
ATVs, quad-bikes fees). Therefore, Sena will not be liable for physical (hereinafter called as "transportation means"), injury, death, or any loss or damage of transportation you must take complete caution regardless of the means, possessions, or assets which belong to you... - Page 44 In addition to damages which may occur due to the use Limitation of Liability of the product, Sena will not be liable for damages of TO THE FULL EXTENT ALLOWED BY LAW, SENA the product which occur due to the following events.
-
Page 45: Warranty Service
Sena whole package as it was purchased. will not be liable for any claim for damages related with Free-of-charge Service the product. - Page 46 1.1.0 www.sena.com User's Guide for Firmware v2.0...
Need help?
Do you have a question about the EXPAND and is the answer not in the manual?
Questions and answers