Low Battery Warning; Checking The Battery Level; Led Indicator; Voice Prompt Indicator - Sena SMH10 User Manual

3.9 Low Battery Warning

When the battery is low, the blinking blue LED in stand-by mode turns to red and you will hear mid-toned
triple beeps and a voice prompt, "Low battery".

3.10 Checking the Battery Level

You can check the battery level in two different ways when the Bluetooth Mic is powering on.

3.10.1 LED Indicator

When the Bluetooth Mic is powering on, the red LED flashes rapidly indicating the battery level.
4 flashes = High, 70~100%
3 flashes = Medium, 30~70%
2 flashes = Low, 0~30%

3.10.2 Voice Prompt Indicator

When you power on the Bluetooth Mic, keep pressing the Center Button and the (+) Button
simultaneously for several seconds until you hear high toned triple beeps. Then you will hear voice
prompt indicating the battery level. However, if you release the buttons as soon as the Bluetooth Mic
turns on, you will not hear the voice prompt of battery level indicator.

3.11 Fault Reset

When the Bluetooth Mic is not working properly or is in faulty status for any reason, you may reset by
pushing the pin-hole reset button at the right side of the main unit. Insert a paper clip into the reset pin-
hole and press the reset button for a second with light pressure. The Bluetooth Mic will be switched off,
and you have to turn the system back on and try again. However, this will not restore the Bluetooth Mic to
factory default setting.
| Bluetooth Mic & Intercom