Stereo Music; Mobile Phone Call Making And Answering - Sena SMH10 User Manual

7. STEREO MUSIC

You can listen to stereo music from your Bluetooth wireless audio device. The Bluetooth audio device
must be paired with the Bluetooth Mic by following the "Bluetooth Stereo Device Pairing" procedures
described in the 5.3 chapter. The Bluetooth Mic supports the Audio/Video Remote Control Profile
(AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the Bluetooth Mic to
remotely control music playback. You not only can adjust the volume but also use the functions such as
play, pause, next track and previous track.
1. To adjust the volume, tap the (+) Button or the (-) Button.
2. To play or pause music, press the Center Button for 1 second until you hear a mid-toned double beep.
3. To track forward or track back, press the (+) Button or the (-) Button for 1 second until you hear a mid-
toned single beep.
You can stop music streaming while you are listening to the music by pressing the (-) Button for 4
seconds until you hear high toned double beeps.

8. MOBILE PHONE CALL MAKING AND ANSWERING

8.1 Mobile Phone Call Making and Answering
1. When you have an incoming call, tap the Center Button to answer the call.
2. To end a call, press the Center Button for 2 seconds until you hear a mid-toned single beep, or wait
for the called person to end the call.
3. To reject a call, press the Center Button for 2 seconds until you hear a beep while the phone is
ringing.
4. There are several ways to make a phone call:
- Enter numbers on your mobile phone keypad and make a call. Then the call is automatically transferred
to the Bluetooth Mic.
- In stand-by mode, press the Center Button for 3 seconds to activate the voice dialing of your mobile
phone. You will hear a high toned single beep. Your mobile phone has to support voice dialing. Refer to
your mobile phone manual for further instruction.
| Bluetooth Mic & Intercom