Enabling/Disabling Voice Prompts (Default: Enable); Enabling/Disabling Rds Af (Default: Disable); Enabling/Disabling Fm Station Guide (Default: Enable); Enabling/Disabling Sidetone (Default: Disable) - Sena SF Series User Manual

15.10 Enabling/Disabling Voice Prompts (Default: Enable)

You can disable voice prompts by software configuration settings, but
the following voice prompts are always on.
– Voice prompts for headset configuration settings menu
– Voice prompts for battery level indicator
– Voice prompts for speed dial
– Voice prompts for FM radio functions
15.11 Enabling/Disabling RDS AF
(Default: Disable) (SF2, SF4)
RDS AF allows a receiver to re-tune to the second frequency location
when the first signal becomes too weak. With RDS AF enabled on the
receiver, a radio station with more than one frequency can be used.
15.12 Enabling/Disabling FM Station Guide
(Default: Enable) (SF2, SF4)
When FM Station Guide is enabled, FM station frequencies are given
by voice prompts as you select preset stations. When FM Station
Guide is disabled, the voice prompts on FM station frequencies will
not be given as you select preset stations.

15.13 Enabling/Disabling Sidetone (Default: Disable)

Sidetone is audible feedback of your own voice. It helps you to
naturally speak at the correct level according to varying helmet noise
conditions. If this feature is enabled, you can hear what you are
speaking during an intercom conversation or a phone call.
SF Series
47