Voice Prompts (Default: Enable); Voice Command (Default: Enabled); Rds Af Setting (Default: Disable); Fm Station Guide (Default: Enable) - Sena MOMENTUM EVO User Manual

11 CONFIGURATION SETTING

11.2.12 Voice Prompts (Default: Enable)

You can disable voice prompts by software configuration settings, but
the following voice prompts are always on.
- Bluetooth system configuration settings menu, battery level indicator,
speed dial, FM radio functions

11.2.13 Voice Command (Default: Enabled)

When Voice Command is enabled, you can use your voice to give a
command the Bluetooth system operate certain operations completely
handsfree. If Voice Command is disabled, you will need to operate all
of the functions using the buttons on the Bluetooth system.

11.2.14 RDS AF Setting (Default: Disable)

Radio Data System (RDS) Alternative Frequency (AF) Setting allows
a receiver to re-tune to the second frequency location when the first
signal becomes too weak. With RDS AF enabled on the receiver, a radio
station with more than one frequency can be used.

11.2.15 FM Station Guide (Default: Enable)

When FM Station Guide is enabled, FM station frequencies are given
by voice prompts as you select preset stations. When FM Station Guide
is disabled, the voice prompts on FM station frequencies will not be
given as you select preset stations.

11.2.16 Sidetone (Default: Disable)

Sidetone is audible feedback of your own voice. It helps you to naturally
speak at the correct level according to varying helmet noise conditions.
If this feature is enabled, you can hear what you are speaking during an
intercom conversation or a phone call.
11.2.17 Advanced Noise Control™ (Default: Enable)
When Advanced Noise Control is enabled, the background noise
is reduced during an intercom conversation. When it is disabled, the
background noise is mixed with your voice during intercom.
MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 44
®