Tektronix MTD200 User Manual page 130

MTD200 MPEG Test Decoder User Manual
Example: SYST:COMM:SER:PAR ODD
SYSTem :COMMunicate :SERial [:RECeive] :BITS 8
*RST value: 8
This command sets the number of data bits.
Example: SYST:COMM:SER:BITS 8
SYSTem :COMMunicate :SERial [:RECeive] :SBITs 1
*RST value: 1
This command sets the number of stop bits.
Example: SYST:COMM:SER:SBIT 1
SYSTem :COMMunicate :SERial [:RECeive] :PACE NONE | XON | ACK
*RST value: NONE
This command sets the transmission protocol.
NONE no handshake
XON software handshake
ACK hardware handshake RTS/CTS
Example: SYST:COMM:SER:PACE NONE
SYSTem :DATE 1900 to 2099, 1 to 12, 1 to 31
Sets the data of the system clock.
Example: SYST:DATE 1996,08,01
SYSTem :TIME 0 to 23, 0 to 59, 0 to 59
Sets the time of the system clock.
Example: SYST:TIME 10,20,00
SYSTem :ERRor?
Queries the oldest entry in the error queue. Positive error numbers denote
device-specific errors; negative error numbers denote error messages specified by
SCPI (refer to SCPI-Specific Error Messages on page 5–63)
Remote Control
5–33