Checking The Status Of Parts And Supplies - Lexmark M5163dn User Manual

Maintaining the printer
3
Insert the emptied hole punch box back into the finisher until it clicks into place.

Checking the status of parts and supplies

A message appears on the printer display when a replacement supply item is needed or when maintenance is
required.
Checking the status of parts and supplies on the printer control panel
From the printer control panel, navigate to:
> Status/Supplies >
Checking the status of parts and supplies from the Embedded Web Server
Note: Make sure the computer and printer are connected to the same network.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Device Status > More Details.
Configuring supply notifications from the Embedded Web Server
You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their
end‑of‑life by setting the selectable alerts.
Notes:
•
Selectable alerts can be set on the toner cartridge, imaging unit, and maintenance kit.
•
All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable
alerts can be set for the end‑of‑life supply condition. E‑mail selectable alert is available for all supply
conditions.
•
The percentage of estimated remaining supply that prompts the alert can be set on some supplies for
some supply conditions.
1
Open a Web browser, and then type the printer IP address in the address field.
View Supplies >
139