Lexmark M5163dn User Manual page 110

Understanding the printer menus
Use
Timeouts
Hibernate Timeout
Disabled
20 minutes
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days
1 week
2 weeks
1 month
Timeouts
Hibernate Timeout on Connection
Hibernate
Do Not Hibernate
Timeouts
Screen Timeout
15–300
Timeouts
Print Timeout
Disabled
1–255
Timeouts
Wait Timeout
Disabled
15–65535
Timeouts
Job Hold Timeout
5–255
To
Set the time before the printer enters Hibernate mode.
Note: 3 days is the factory default setting.
Set the printer to Hibernate mode even if there is an active
Ethernet or fax connection.
Note: Do Not Hibernate is the factory default setting.
Set the idle time before the display automatically returns to
Ready state.
Note: 30 seconds is the factory default setting.
Set the printer to end a print job after it has been idle for the
specified amount of time.
Notes:
•
90 seconds is the factory default setting.
•
When the timer expires, any partially printed page still in
the printer is printed.
•
Print Timeout is available only when using PCL
emulation.
Set the time the printer waits to receive for more data before
canceling a print job.
Notes:
•
40 seconds is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation.
Set the time the printer waits for user intervention before it
holds jobs that require unavailable resources.
Notes:
•
30 seconds is the factory default setting.
•
This menu appears only when a hard disk is installed.
110