Understanding the printer menus
Use
Download Target
RAM
Flash
Disk
Resource Save
On
Off
Print All Order
Alphabetical
Oldest First
Newest First
Finishing menu
Use
Sides (Duplex)
1 sided
2 sided
To
Set the storage location for downloads.
Notes:
•
RAM is the factory default setting. Storing downloads in
the RAM is temporary.
•
Storing downloads in a flash memory or in a printer hard
disk places them in permanent storage. Downloads
remain in the flash memory or printer hard disk even
when the printer is turned off.
•
This menu item appears only if an optional flash memory
or a formatted, working printer hard disk is installed.
Specify how the printer handles temporary downloads, such
as fonts and macros stored in the RAM, when the printer
receives a print job that requires more than the available
memory.
Notes:
•
Off is the factory default setting. This sets the printer to
retain downloads only until memory is needed.
Downloads are deleted in order to process print jobs.
•
On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then Memory Full [38] appears on the
printer display, but downloads are not deleted.
Specify the order in which held and confidential jobs are
printed when Print All is selected.
Note: Alphabetical is the factory default setting.
To
Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
Notes:
•
"1 sided" is the factory default setting.
•
You can set two‑sided printing from the printer software.
For Windows users:
Click File > Print, and then click Properties, Preferences, Options, or
Setup.
For Macintosh users:
Choose File > Print, and then adjust the settings from the Print dialog and
pop‑up menus.
116