Step 2:
Figure 38: Fastening the batten rail
Remove roof tile from the specified area
Horizontally move the reinforcing runner (2) horizontally until the slot on the support member (3)
covers the hole of the reinforcing rail. Secure the reinforcing runner using one screw (4) (screw may
alternatively be fastened from the top).
Remove the roof hook once again and fasten the reinforcing runner to the rafter using screws (5).
Step 3:
Figure 39: Connecting sheet metal roof tiles with batten rail
Fit roof hooks using screws (6) and (4) and additionally secure the reinforcing runner to the batten
using screw (4) (may alternatively be fastened from the top).
28
Version 17.01, as of: 27-Jun-2017