Table of Contents
Advertisement
07. Fitting cable clips
The cable clips are used to fix the module connector cables and prevent sagging of the cable. The clips
can be clamped to the carrier rails of the mounting system TopFix 200 or to the photovoltaic module
frames without any tools. Figure 96 shows the attachment of the cable clips 0° at the PV-module frame. In
Figure 97 the cable clip is shown schematically 90° on a support profile.
Figure 96: cable clip 0° on module frame
Figure 97: cable clip 90° on support profile
55
Version 17.01, as of: 27-Jun-2017
Hide quick links:
Advertisement
Table of Contents
