IBC TopFix 200 Installation Manual page 18

4.3.4 "Mammut SV+" roof hooks
For vertical installation of the carrier profile in the 1st layer.
Figure 17: "Mammut SV+" roof hook
parameters
Material
yield strength
Dimensions base plate (length / width / height)
Dimensions hook (width / height)
Drilling holes baseplate
Drilling holes hook
Hook distance from the base plate
weight
General construction approval
Maximum ch. load / roof hook [kN]
Accessories
flat head screw 6x100-A2 TX25
flat head screw 8x100-A2 TX40
flat head screw 8x140-A2 TX40
flat head screw ASD 8x240-A2 TX40
countersunk screw 8x280 TX40
flat head screw ASD 8x300-A2 TX40
countersunk screw 8x340 TX40
connection piece for roof hook profile M10
Figure 18: parameters roof hook „Mammut SV+"
18
Version 17.01, as of: 27-Jun-2017
values
Stainless steel 1.4301 S460
f = 460 N/mm²
y,k
157/ 65/ 5 mm
35/ 6 mm
∅ 9 mm
slot ∅ 11 mm, L=30 mm
45 mm
1,02 kg
Z-14.4.-661
not specified not specified not specified