IBC TopFix 200 Installation Manual page 37

4.8 Mounting plate duo
The mounting plate duo is used for fixing with two hanger bolts or two solar fasteners. The two screws are
connected through the mounting plate duo. The rooftop connector profile is then fixed on the mounting
plate duo.
There are two different variants for connecting the profiles. For fixing a TF60 profile, only a RH-profile
connecting element is required in accordance with Figure 55. For fixing the profiles TF50+ and TF50m, on
the other hand, a universal connector and additional screws for fixing the universal connector are required
in accordance with Figure 54.
The mounting plate duo can be used for trapezoidal sheet or corrugated eternit roof coverings. The
maximum high-beading space must be 330 mm.
Component length mounting plate duo: 370 mm
Figure 54: Mounting plate Duo with universal connector
Figure 55: Mounting plate duo with connecting element RH-profile
37
Version 17.01, as of: 27-Jun-2017