IBC TopFix 200 Installation Manual page 31

4.5.4 Fitting „Mammut Form S+" roof hook for slate and metal shingle roofs
Step 1:
Figure 43 Insert the metal plate (slte roof only))

Fix the position of the roof hook in such a way, that this can be fastened with the screws in the rafter.
Observe the edge distances according Figure 121

Replace the slate plate with an individual manufactured metal plate (1). Not necessary for metal
shingle roofs.
Step 2:
Figure 44 Fix the mounting plate

Position the mounting plate (2) an d fix it with the wood screws (3) in the rafter.
Important!
The mounting plate must lie completely on the metal plate or the metal shingle.
31
Version 17.01, as of: 27-Jun-2017
Legend:
(1) Metal plate
(2) Mounting plate
(3) Woodscrew 8x140 mm
(4) cover cap
(5) roof hook
(6) Screw nut M6