Auto Clock Setting; Manual Clock Setting - Pioneer RCS-404H Operating Instructions Manual

Getting started
04
•

Auto clock setting

Some TV channels broadcast time signals together
with the program. This recorder can use these
signals to set the clock automatically.
Set 'Clock Set CH' to the channel preset number
that broadcasts a time signal, then move the
cursor down to 'Start' and press ENTER.
k Setting Auto Clock Setting
Line System
er Save
P
p Navigator p Navigator
The recorder takes a short while to set the time. After
you see that it's set, select Next to proceed.
k Setting Auto Clock Setting
Line System
er Save
P
p Navigator p Navigator
If the time could not be set automatically, press
RETURN to go back to the previous screen and select
Manual.
•

Manual clock setting

If no stations in your area are broadcasting time
signals, you can set the clock manually.
Use the
You can set this by selecting a city or a time relative
to GMT.
k Setting Manual Clock Setting
Line System
er Save
P
p Navigator p Navigator
Press then use the
or 'Off' for summer time, then press ENTER.
Select On if you are currently using summer time.
k Setting Manual Clock Setting
Line System
er Save
P
p Navigator p Navigator
Set the date (day/month/year) and time, then
press ENTER to make all the settings.
k Setting Manual Clock Setting
Line System
er Save
P
p Navigator p Navigator
Use the
highlighted field.
60
En
Date – – / – – / – – – –
Time – – : – –
Clock Set CH
P r 1
S t a r t
Date S UN 0 1 / 0 1 / 20 0 6
Time 1 1 : 2 0
Clock Set CH P r 1
S t a r t
N e x t
buttons to set your time zone.
1/2
Austria
Time Zone
Vienna
Summer Time Of f
buttons to select 'On'
1/2
Austria
Time Zone
Vienna
Summer Time On
2/2
SUN 01 / 01 / 2006
Date
Time 00 : 00
Austria
Time Zone
Vienna
On
Summer Time
buttons to change the value in the
Use the buttons to move from one field to
another.
• You can go back to the previous screen at anytime in
the Setup Navigator by pressing RETURN.
ENTER
7 Select the TV screen type, 'Wide (16:9)' or
'Standard (4:3)'.
k Setting TV Screen Size
Line System
er Save Wide (16:9)
P Standard (4:3)
p Navigator p Navigator
ENTER
8 Select whether or not your TV is
compatible with progressive scan video.
k Setting Progressive
Line System
er Save Compatible
P Not Compatible Not Compatible
p Navigator p Navigator Don't Know
• Note that progressive scan video is only output
through the AV1(RGB)-TV connector and the
component video outputs.
9 Press to continue after reading the HDD
ENTER
caution.
k Setting In the event of HDD failure, recordings may
be lost or normal playback/recording may
Line System
not be possible.
er Save
As recordings might be lost in case of a HDD
P
failure, we recommend to use the HDD only
as temporary storage media.
p Navigator p Navigator
Please copy recordings you want to keep
to recordable DVD.
Press ENTER to continue.
ENTER
10 Select 'Finish Setup' to exit the Setup
Navigator, or 'Go Back' if you want to start again.
k Setting
Line System S et up i s com pl ete !
er Save En jo y usi ng yo ur DV D reco r der !
Fi ni sh S et up Fi ni sh S et up
p Navigator p Navigator G o B ack
That completes basic setup using the Setup Navigator.
• If there are blank channels with no station, you can
set these to skip using the manual channel setting.
See Manual CH Setting on page 129.