Display - Pioneer RCS-404H Operating Instructions Manual

Controls and displays
03

Display

1
Lights during playback; blinks when playback is paused.
2
Lights when copying.
3
Lights during recording; blinks when recording is
paused.
4 (page 79)
Lights when a timer recording has been set.
(Indicator blinks if the timer has been set to DVD but
there isn't a recordable disc loaded, or the timer has
been set to HDD but the HDD is not recordable.)
NTSC
Lights when the video output signal format is NTSC.
(page 130)
Indicates which channels of a bilingual broadcast
are recorded.
(page 129)
Lights when the component video output is set to
progressive scan.
VPS / PDC (page 79)
Lights when receiving a VPS/PDC broadcast during a
VPS/PDC-enabled timer recording.
5 Recording quality indicators (page 77)
XP
Lights when the recording mode is set to XP (best
quality).
SP
Lights when the recording mode is set to SP
(standard play).
LP / SLP
Lights when the recording mode is set to LP (long
play) or SLP (super-long play).
EP / SEP
Lights when the recording mode is set to EP
(extended play) or SEP (super-extended play).
58
En
1 2 3
8 7 6
MN
Lights when the recording mode is set to MN
(manual recording level) mode.
6 Character display
7 R / RW
Lights when a recordable DVD-R or DVD-RW disc is
loaded.
8 PL (page 97)
Lights when a VR mode disc is loaded and the
recorder is in Play List mode.
2 3 (page 134)
Shows the remote control mode (if nothing is
displayed, the remote control mode is 1).
V
Lights when an unfinalized Video mode disc is
loaded.
4 5
L R P