Connecting An External Decoder Box (2) - Pioneer RCS-404H Operating Instructions Manual

Connecting up
02
1 Connect the cable from the antenna/cable TV
outlet to the antenna input on your VCR/satellite
receiver/cable box.
2 Use a SCART cable (not supplied) to connect your
decoder to your VCR/satellite receiver/cable box.
See the manual for your decoder box for more detailed
instructions.
3 Use a SCART cable to connect your VCR/satellite
receiver/cable box to the AV2(INPUT 1/DECODER)
AV connector on this recorder.
4 Use a SCART cable to connect the AV1(RGB)-TV
AV connector to your TV.
Note
1 In order to use this setup, you will need to make the following settings from the Initial Setup menu:
• Set the AV2/L1 In setting to Decoder from the Initial Setup menu (see AV2/L1 In on page 130).
• From the Manual CH Setting screen, set the Decoder setting for the scrambled channels to On (see Manual CH Setting on page 129).
54
En
Connecting an external decoder box
(2)
If you only have a decoder, connect it to this recorder and
your TV as shown on this page.
Using the setup on this page you can:
• Record scrambled channels received using the
recorder's built-in TV tuner.
Important
• Do not connect this recorder 'through' your VCR,
satellite receiver or cable box. Always connect each
component directly to your TV or AV amplifier/
receiver.
SCART AV
CONNECTOR
2
AV 1 (RGB) – TV
AC IN
DIGITAL CONTROL
OUT
COAXIAL IN COMPONENT
G-LINK
VIDEO OUT
3
SCART AV
CONNECTOR
1 Connect RF antenna cables as shown.
This enables you to watch and record TV channels.
2 Use a SCART cable (not supplied) to connect the
AV1(RGB)-TV AV connector to a SCART AV connector
on your TV.
This enables you to watch discs.
3 Use another SCART cable to connect the
AV2(INPUT 1/DECODER) AV connector to a SCART AV
connector on your decoder box.
This enables you to record scrambled TV channels.
1
ANTENNA
IN
TV
1
ANTENNA
IN (RF IN)
AV 2 (INPUT 1/DECODER)
Y
IN
P
B
OUTPUT
R L
OUT
P R
ANTENNA
AUDIO VIDEO
S-VIDEO
ANTENNA
OUT
1
Antenna/cable TV
Decoder wall outlet