Auto Clock Setting; Manual Clock Setting - Pioneer DVR-310-S Operating Instructions Manual

Getting started
04
After selecting Antenna or Cable the recorder starts
automatic tuning. This takes a couple of minutes to
complete.
6 Select 'Auto' for automatic time setting, then
press ENTER.
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
•

Auto clock setting

Some TV channels broadcast time signals together
with the program. This recorder can use these
signals to set the clock automatically.
Set 'Clock Set CH' to the channel preset number
that broadcasts a clock signal, then move the
cursor down to 'Start' and press ENTER.
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
The recorder takes a short while to set the time. After you
see that the time has been set, select Next to proceed.
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
If the time could not be set automatically, press RETURN
to go back to the previous screen and select Manual.
•

Manual clock setting

If no stations in your area are broadcasting time
siganals, you can set the clock manually.
24
En
Tuning
7/68
Cancel
Clock Setting
Clock Set
On Screen Display
Front Panel Display
Auto
Remote Control Set
Manual
Setup Mavigator Setup Mavigator
Auto Clock Setting
Clock Set
On Screen Display
Date
Front Panel Display
Time
Remote Control Set
2
Clock Set CH
Setup Mavigator Setup Mavigator
Start
Auto Clock Setting
Clock Set
On Screen Display
Date
04 21 2003 MON
Front Panel Display
11 20 AM
Time
Remote Control Set
2
Clock Set CH
Setup Mavigator Setup Mavigator
Start
Next
Use the (cursor left/right) buttons to set
your time zone, then press ENTER.
Initial Setup
Manual Clock Setting
Basic
Clock Set
Tuner
On Screen Display
Video Out Front Panel Display
Time Zone
Audio In Remote Control Set
Audio Out Setup Mavigator
Setup Mavigator
D.S.T.
Language
Recording
Playback
Press (cursor down) then use the
left/right) buttons to set D.S.T. to On or Off, then
press ENTER.
Select On if you are currently using daylight saving
time.
Set the current date and time.
Initial Setup
Manual Clock Setting
Basic Clock Set
Tuner On Screen Display
Date
Video Out Front Panel Display
Audio In Remote Control Set
Time
Audio Out
Setup Mavigator Setup Mavigator
Time Zone
Language
Recording
D.S.T.
Playback
• Use the (cursor up/down) buttons to change
the value in the highlighted field.
• Use the (cursor left/right) buttons to move
from one field to another.
• Press ENTER to finish setting the time.
7 Select the kind of TV you have, 'Wide (16:9)' or
'Standard (4:3)'.
Initial Setup
TV Screen Size
Basic Clock Set
Tuner On Screen Display
Video Out Front Panel Display
Audio In Remote Control Set
Audio Out Setup Mavigator
Setup Mavigator
Language
Recording
Playback
Use the (cursor up/down) buttons to select, then
press ENTER.
8 Is your TV compatible with progressive scan
video?
Initial Setup
Progressive
Basic
Clock Set
Tuner
On Screen Display
Video Out
Front Panel Display
Audio In
Remote Control Set
Audio Out
Setup Mavigator Setup Mavigator
Language
Recording
Playback
1/2
USA
Alaska
Off
(cursor
2/2
WED
01 01 2003
AM
12 00
USA
Alaska
Off
Wide (16:9)
Standard (4:3)
Compatible
Not Compatible
Don't Know