Auto Clock Setting; Manual Clock Setting - Pioneer DVR-520H Operating Instructions Manual

Getting started
After selecting Antenna or Cable the recorder starts
automatic tuning. This takes a couple of minutes to
complete.
Tuning
Cancel
6 Select 'Auto' for automatic time setting, or
'Manual' to set the clock manually, then press
ENTER.
Initial Setup
Basic Clock Setting
Clock Set
Tuner
Input Line System
Video In/Out On Screen Display
Audio In Front Panel Display
Audio Out Remote Control Set
Language Setup Navigator Setup Navigator
Recording
Playback
•

Auto clock setting

Some TV channels broadcast time signals together
with the program. This recorder can use these
signals to set the clock automatically.
Set 'Clock Set CH' to the channel that broadcasts
a time signal, then move the cursor down to
'Start' and press ENTER.
Initial Setup
Auto Clock Setting
Basic Clock Set
Tuner
Input Line System
Date
Video In/Out
On Screen Display
Time
Audio In
Front Panel Display
Clock Set CH
Audio Out
Remote Control Set
Language
Setup Navigator Setup
Recording
Playback
The recorder takes a short while to set the time. After you
see that the time has been set, select Next to proceed.
Initial Setup
Auto Clock Setting
Basic
Clock Set
Tuner
Input Line System
Date
Video In/Out
On Screen Display
Time
Audio In Front Panel Display
Clock Set CH
Audio Out Remote Control Set
Language Setup Mavigator
Setup Mavigator
Recording
Playback
If the time could not be set automatically, press RETURN
to go back to the previous screen and select Manual.
•

Manual clock setting

If no stations in your area are broadcasting time
signals, you can set the clock manually.
7/68
Auto
Manual
2
Start
THU 01 01 2004
11 20
2
Start
Next
Use the (cursor left/right) buttons to set
your time zone.
You can set this by selecting a city or a time relative
to GMT.
Initial Setup
Basic Clock Setting
Manual Clock Setting
Tuner Input Line System
Video In/Out
On Screen Display
Time Zone
Audio In
Front Panel Display
Audio Out
Remote Control Set
D.S.T.
Language
Setup Navigator
Setup Navigtting
Recording
Playback
Press (cursor down) then use the
left/right) buttons to select 'On' or 'Off' for
daylight saving (D.S.T.), then press ENTER.
Select On if you are currently using daylight saving.
Initial Setup
Manual Clock Setting
Basic Clock Set
Tuner Input Line System
Video In/Out On Screen Display
Time Zone
Audio In Front Panel Display
Audio Out Remote Control Set
D.S.T.
Language Setup Navigator Setup Navigator
Recording
Playback
Set the date and time, then press ENTER to make
all the settings.
Initial Setup
Basic Manual Clock Setting
Clock Setting
Tuner
Input Line System
Date
Video In/Out
On Screen Display
Audio In
Front Panel Display Time
Audio Out
Remote Control Set
Time Zone
Language Setup Navigator
Setup Navigg
Recording
D.S.T.
Playback
Use the (cursor up/down) buttons to change
the value in the highlighted field.
Use the (cursor left/right) buttons to move
from one field to another.
• Press ENTER to finish setting the time.
7 Select the TV screen type, 'Standard (4:3)' or
'Wide (16:9)'.
Initial Setup
TV Screen Size
Basic Clock Set
Tuner Input Line System
Video In/Out On Screen Display
Audio In Front Panel Display
Audio Out Remote Control SetSetup Navigator
Language Setup Navigator
Recording
Playback
Use the (cursor up/down) buttons to select, then
press ENTER.
1/2
Mexico
Baja California Norte
Off
(cursor
1/2
Mexico
Baja California Norte
On
2/2
THU 01 01 2004
00 00
Mexico
Baja California Nrote
Off
Wide (16:9)
Standard (4:3)
04
25
En