Speaker Setup Guide; Safety Precautions When Setting Up; Home Theater Sound Setup (Rcs-606H) - Pioneer RCS-404H Operating Instructions Manual

Speaker Setup Guide

Chapter 2
Speaker Setup Guide

Safety precautions when setting up

When assembling the speakers, lay them down flat on
their side to avoid accidents or injury. Make sure to use a
stable surface when assembling, setting up, and placing
the speakers.
Home theater sound setup
(RCS-606H)
• This is a standard multichannel surround sound
speaker setup for optimal 5.1 channel home theater
sound.
Front
left
Listening position
Surround
left
1 Attach the speaker stand bases to the stems
using the screws provided.
Once you have aligned the stem and base, secure with
the small screws at the points shown below. Note that
the speaker should face in the direction of the base of the
isosceles triangle (outlined below).
Front
right
Center
Receiver subwoofer
Surround
right
Rear
Front
2 Attach the smaller non-skid pads to the base of
the center speaker. The large non-skid pads are for
the front and surround speakers, and the receiver
subwoofer (as shown).
Use the adhesive side of the pads to attach them to the
base (flat surface) of each speaker.
Non-skid pads
(small) x 4
Non-skid pads
(large) x 16
Non-skid pads
(large) x 4
Center speaker
Front and
surround
speakers
Receiver
subwoofer
5
En