Getting Started; Switching On And Setting Up - Pioneer RCS-404H Operating Instructions Manual

Getting started

Chapter 4
Getting started

Switching on and setting up

When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator feature. This takes you through setting the
clock, the internal TV tuner and the video output.
If you're using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
1 Switch on your TV and set the video input to this
recorder.
RECORDER
2 Switch on the recorder.
When you switch on for the first time, your TV should
display the Setup Navigator screen (If the Setup
Navigator doesn't appear, you can also access it from the
Initial Setup menu; see page 128).
• If this recorder is connected to a compatible TV using
a fully-wired 21-pin SCART cable, the recorder will
take a few seconds to download country, TV screen
size and language information. (Check the manual
that came with your TV for compatibility information.)
ENTER
3 Choose a language (then press ENTER).
Initial Setup
Basic Basic Clock Setting Language
Tuner Input Line System
Video In/ O ut Pow er Save
Audio In Help
Audio O ut Setup N avig ator Setup N avig ator
Language
Re cording
Playback
4 Start the Setup Navigator.
ENTER
k Setting
Complete this setup before you
t Line System
start using your recorder.
er Save
Start
Start
P
Cancel
p Navigator p Navigator
Please use the Initial Setup if you
want to make more detailed settings.
• If you don't want to use the Setup Navigator, press
to select Cancel, then press ENTER to exit the Setup
Navigator.
ENTER
5 Select the Auto Channel Setting ('Auto
Scan' or 'Download from TV'), or 'Do not set'.
k Setting Auto Channel Setting
Line System
er Save Auto Scan English
P Download from TV
p Navigator p Navigator Do not Set
• Select Do not set if you want to skip channel setup
(because they have already been set up, for example).
• You can only use the Download from TV feature if
this recorder is connected to your TV using a fully-
wired 21-pin SCART cable via the AV1(RGB)-TV
connector, and if your TV supports this function
(check your TV's instruction manual for more
details).
ENTER
• Select your country.
k Setting k Setting Country Selection
t Line System Line System
er Save er Save Country
P
• Auto-tuning channels
The Auto Scan option automatically scans and sets the
channel presets.
Tuning
Cancel
• Downloading channels from your TV
Use the Download from TV option to download all the
channels that your TV is tuned to.
Downloading
Cancel
ENTER
6 Select 'Auto' for automatic time setting,
or 'Manual' to set the clock manually.
k Setting Clock Setting
Line System
er Save Auto Auto
P Manual
Austria
32/99
Pr 5
32/99
04
59
En