Displaying Disc Information On-Screen - Pioneer RCS-404H Operating Instructions Manual

Playback
Displaying disc information on-
screen
You can display various on-screen information about the
disc loaded or the HDD.
DISPLAY
• Display/change the on-screen information.
• Press once to show the HDD and removable disc
(DVD, etc.) activity together. Press again to show the
status of just the currently selected playback/
recording device (HDD or removable disc).
• To hide the information display, press DISPLAY
repeatedly until it disappears.
HDD and removable disc activity display
Press DISPLAY once to see the HDD and removable disc
(DVD, etc.) activity. Use the HDD/DVD button to switch
between the two kinds of display.
The example displays below show high-speed copying
from HDD to DVD, and HDD chase playback.
Rec Mode SP(2h00m/DVD)
HDD Hi-Speed Copy
HDD
Remain 10h35m
Stop
0h08m left
Rec Mode SP(2h00m/DVD)
HDD
Remain 10h35m
Chase Play
Rec
Recording time
Relative playback position
DVD-RW Video
DVD
Remain –h––m
Stop
DVD-RW Video
Remain 0h52m
Stop
Shows recording restrictions for
the current channel program
Stop
DVD-RW VR Resume
Original XP (1h00m/DVD)
Finalized
Disc Name : Comedy shows
Indicates copy-protected material
Indicates a multi-angle scene
Play 3–2 0. 00. 15
DVD-R Video Chapter Time 0. 00. 21
Chapter Total 0h01m52s
Title Name : 21/11 Football match
Indicates the data transfer rate
Tip
• See Switching camera angles on page 94 for more on
multi-angle scene switching.
• When using the simultaneous play and record
feature, the display shows information for playback
only.
• During real-time copy, the copy source playback
information is displayed.
• The Video mode disc displays become the same as a
DVD-Video disc once the disc is finalized.
• The total recording time figure shown in parenthesis
is calculated based on a
12 cm / 4.7 GB disc at the displayed record setting.
• Recording and playback times for TV recordings are
approximately 0.1 % shorter than the actual time.
This is because of the slightly different frame rates of
TV broadcasts versus DVD.
• The frame number is shown next to the elapsed time
display when the disc is paused.
• Copy Once or Can't Record messages may appear
in the stop or recording displays. These indicate that
the broadcast TV program contains copy control
information.
ABC Pr 1
Stereo
Rem. 0h35m Copy Once
DVD Mode
!
4.32Mbps
07
95
En