Copying From Dvd To Hdd - Pioneer RCS-404H Operating Instructions Manual

Copying and backup
• Move – Change the order of titles in the Copy List
(see Move on page 103).
• Preview – Check the content of a title in the Copy
List.
• Divide – Divide a title in the Copy List into two (see
Divide on page 101).
• Combine – Combine two titles in the Copy List into
one (see Combine on page 104).
• Chapter Edit – Edit chapters within a Copy List title
(see Chapter Edit on page 101):
• Divide – Divide a chapter into two.
• Erase/Move – Erase a chapter/Change the
chapter order.
• Combine – Combine two chapters into one.
• Set Thumbnail – Set the thumbnail frame for a title
(see Set Thumbnail on page 100).
• Recording Mode – Set the picture quality of the copy
(see Recording Mode on page 110).
• Bilingual – Set how bilingual audio should be copied
when copying from HDD to Video mode DVD (see
Bilingual on page 110).
• Cancel – Exit the menu.
Repeat this step for as many titles you have that need
editing.
ENTER
9 Display the command menu panel.
ENTER
10 Select 'Next' to proceed.
Copy HDD DVD (Video mode)
Title Edit
20:00 Wed 29/03 Pr 2 SP
1
2 20:00 Wed 22/03 Pr 2 SP
20:00 Wed29/03 Pr 2 SP
Copy List Total
Current DVD Remain
There are several options available from the next screen:
• Select Recording Mode if you want to change the
recording quality (see Recording Mode on page 110).
• Select Input Disc Name if you want to change the
disc name. Input a name of up to 64 characters for a
VR mode disc or 40 characters for a Video mode disc
or DVD+R/+RW. (The input method is similar to that
of naming titles; see Title Name on page 99.)
Note
1 Titles recorded in MN1 to MN6, SEP, SLP or EP mode cannot be copied to DVD+R/+RW using high-speed copy.
2 If a timer recording is scheduled to start during copying, the disc will not be finalized.
2 Title
1 > 2 > 3
Return
Next
1h00m(2.0G)
4.3G
4.3G
• Select Finalize if you want to automatically finalize a
Video mode DVD or DVD+R after copying.
title menu style from the following screen.
ENTER
11 Select 'Start Copy' to start copying.
Copy HDD DVD (Video Mode)
Start Copy
HDD
Copy Time 0h 16m
Recording Mode High-Speed
Disc Name
Finalize Off
Copy List Total
Current DVD Remain
• If you're using a DVD-R DL or DVD+R DL disc and
the copy will span both layers, the Copy List Total
bar will be purple.
• The Current DVD Remain bar will be half-length if
the first layer of a DVD-R DL or DVD+R DL disc is
already full.

Copying from DVD to HDD

Important
• The DVD to HDD Copy screen isn't accessible when
a finalized Video mode disc or a DVD-Video is loaded.
As long as the disc is not Copy Guard protected, you
can still use the One Touch Copy function, however
(See One Touch Copy on page 106).
• The recorder can only store one Copy List at a time.
• The Copy List will be erased if:
– any of the titles on the DVD disc are erased or
edited.
– the disc tray is opened.
– playback is switched between Play List and
Original.
– the DVD disc is re-initialized or finalized.
– the recorder is reset to its factory settings (see
Resetting the recorder on page 148).
• It may not be possible to copy from a DVD disc that
was recorded on a different DVD recorder or a PC.
1
2
Select a
1 > 2 > 3
DVD-RW
Video Mode Return
Recording Mode
Input Disc Name
Finalize
Start Copy
4.3G
4.3G
09
109
En