Programming System - Pioneer DVR-310 Operating Instructions Manual

Recording
06
2 Select 'New Input' to set a new timer program,
then press ENTER.
Timer Recording
Date
TUE 12/12
Recorded Title Name
Input
3 Enter the timer recording settings.
Use the (cursor left/right) buttons to select a field;
use the (cursor up/down) buttons to change the
value.
• Date – Choose a date up to one month in advance, or
select a daily or weekly program.
• Start – Set the recording start time.
• Stop – Set the recording end time (maximum length
of a timer recording is 6 hours).
• CH – Choose a channel (1–99, excluding skip
channels), or one of the external inputs from which to
record.
• Mode – Select FINE, SP, LP or EP (See Setting the
picture quality/recording time on page 44). If Manual
Recording is on, then you can also select the MN
setting.
• Recorded Title Name – Optionally, you can enter a
name for the recording up to 32 characters.
4 After entering all the timer recording
information, press ENTER.
The main timer recording screen is displayed again. The
timer program you just input appears in the list.
• The rightmost column in the timer recording screen
(Result) shows whether there's enough space to
record your timer program. If you selected a daily or
weekly program, the date of the last recording that
will fit on the disc appears (up to a maximum of one
month ahead).
• If the timer program is too long to fit into the available
disc space, the message Time Over appears. The
program will record until the disc is full.
• If Optimized Rec (see Optimized Rec on page 83) is
set to On, the recorder will adjust the recording
quality to try and fit the recording on the disc. If the
program is too long even when recorded in EP
(extended play), the message Time Over appears.
• If there are already the maximum number of titles or
chapters on the disc, the message Title Over or
Data Over appears. (There can be up to 99 titles on
a disc.)
48
En
Start Stop CH Rec Mode
10 00 11 00 Pr 7 SP
• If a timer program overlaps another in the list, the
message Overlap appears.
• If no recordable disc is loaded, the message Can't
Rec appears.
• 6 Hour Over is displayed if a recording over 6 hours
is set.
5 To exit the timer recording screen, press HOME
MENU.
Timer recording using the VCR Plus+

programming system

This system makes programming timer recordings very
simple. Most TV guides publish PlusCode programming
numbers with their program details. If you want to make
a timer recording of a program, you just input the
corresponding code. The date, start, stop and channel
settings are made automatically. All you have to do is tell
the recorder the recording mode, and whether it's a
once-only recording or a regular recording.
VCR Plus+
1 Press 'VCR Plus+' to display the VCR Plus+
program screen.
You can also access this screen from the Home Menu
(press HOME MENU, select Timer Recording, then VCR
Plus+).
VCR Plus+
PlusCode# 3 9 9 2 4
MN21
Rec Mode
Rec Times Once Daily
®
CLEAR
ENTER
REC MODE
0 9
to input
REC MODE to change
to change level
Weekly to change