Getting Started; Switching On And Setting Up - Pioneer DVR-541H-S Operating Instructions Manual

Getting started

Chapter 4
Getting started

Switching on and setting up

When you switch the recorder on for the first
time, you can make several basic settings
using the Setup Navigator feature. This takes
you through setting the clock, the internal TV
tuner and the video output.
If you're using the recorder for the first time,
we strongly recommend you use the Setup
Navigator before starting to use the
recorder.
Important
• Some of the Setup Navigator on-screen
displays (OSDs) in this section vary
slightly depending on the country or
region of purchase.
1 Switch on your TV and set the video
input to this recorder.
STANDBY/ON
2 Switch on the recorder.
When you switch on for the first time, your
TV should display the Setup Navigator
screen (If the Setup Navigator doesn't
appear, you can also access it from the
Initial Setup menu; see page 101).
ENTER
3 Choose a language (then
press ENTER).
Initial Setup
Basic Clock Language
Basic
Tuner Input Line System
Video In/Out HELP
Audio In Setup Navigator Setup Navigator
Audio Out
Language
Recording
Playback
4 Start the Setup Navigator.
ENTER
k Setting
Complete this setup before you
t Line System
start using your recorder.
er Save
Start Start
P
Cancel
p Navigator p Navigator
Please use the Initial Setup if you
want to make more detailed settings.
• If you don't want to use the Setup
Navigator, press
then press ENTER to exit the Setup
Navigator.
ENTER
5 Select the 'Auto Scan' then
press ENTER.
k Setting Auto Channel Setting
Line System
er Save Antenna English
P Cable
p Navigator p Navigator Do not Set
• Select Do not set if you want to skip
channel setup (because they have
already been set up, for example).
English Italiano
Español Português
to select Cancel,
04
27
En