Rma Chassis Errors Or License Transfers Between Systems; License Listed As Missing - Cisco Nexus 9000 Series Troubleshooting Manual

Nx-os release 7.x
Hide thumbs Also See for Nexus 9000 Series:
Table of Contents

Advertisement

RMA Chassis Errors or License Transfers Between Systems

Recommended Action: Reinstall the correct license for the chassis where the supervisor
module is installed.
Note
When entering the chassis serial number during the license ordering process, do not use the letter "O"
instead of any zeros in the serial number.
RMA Chassis Errors or License Transfers Between Systems
A license is specific to the system for which it is issued and is not valid on any other system. If you need to
transfer a license from one system to another, contact your technical support representative.

License Listed as Missing

After a license is installed and operating properly, it might show up as missing if you modify your system
hardware or encounter a bootflash: issue.
Symptom
A license is listed as
missing.
Cisco Nexus 9000 Series NX-OS Troubleshooting Guide, Release 7.x
36
Possible Causes
The supervisor module was replaced after
the license was installed.
The supervisor bootflash: is corrupted.
Troubleshooting Licensing Issues
Solutions
See
Corrupted Bootflash Recovery, on
page 15
to recover from the corrupted
bootflash:. Reinstall the license.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents