Nexcom PPC-240T-HW-01 User Manual page 74

Chapter 4: BIOS Setup
Graphics Configuration
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Chipset
Graphics Configuration
IGFX VBIOS Version 1039
IGfx Frequency 400 MHz
Primary Display [Auto]
Internal Graphics [Auto]
DVMT Total Gfx Mem [256M]
Primary IGFX Boot Display [LVDS/DVI2]
Secondary IGFX Boot Display [DVI1]
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Primary Display
Select which graphics device should be primary display or select SG for
switchable GFx.
Internal Graphics
Keep IGD enabled based on the setup options.
DVMT Total Gfx Mem
Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics
Device.
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
Primary IGFX Boot Display
Select the video device which will be activated during POST. Has no effect
if external graphics is present. Secondary boot display selection will appear
based on your selection. VGA modes will be supported only on primary display.
Secondary IGFX Boot Display
Select the secondary display device.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
59
(M)PPC-240T-HW-01 User Manual