Configuring The Audio Properties; Adjusting The Volume; Setting The Ringing Properties - Mitel 6920 SIP Manual

Personalizing your phone
Setting the brightness:
Set the desired brightness level using the horizontal navigation key and confirm
with the
Setting the duration for brightness:
Enter the desired time in seconds in the input field and confirm with the
softkey.

Configuring the audio properties

This section explains how to set audio properties.

Adjusting the volume

You want to change the volume of the ring tone or the handset during a
call.
Ring volume: You can adjust the volume in the idle state or when the ring
tone sounds. Press and hold the volume down button to switch off the ring
tone completely.
Handset volume: You need to set the volume of handset and loudspeaker
separately. The new handset volume will remain saved even after the call
is ended.
Adjusting the volume (in idle state, during ringing phase/call):
Quieter: Press the
Louder: Press the

Setting the ringing properties

You want to change the way in which your phone rings.
Available settings:
Ring tones
Ring tonesRing tone
mode
• Ring tone 1...15
78
Save softkey.
key.
key.
Description
Selection of available ring melodies.
Save
Mitel 6920 SIP
eud-1763/1.0 – R5.0 HF1 – 08.2017