Table of Contents
Advertisement
Press the function key for the desired call routing profile.
➔
Call routing is activated/deactivated, LED of the function key is switched
on/off.
Activating Ring Alone
You want to specify the phone on which an incoming call is signalled
acoustically.
If your system administrator has set up one phone number for several
phones (see "One number user concept", page 8),you can use Ring Alone
to define on which phone a call will be signalled acoustically. As soon as
you activate Ring Alone on one phone, the ring tone is deactivated for all
other phones. An incoming call is signalled in the display of all phones.
You can answer the call on each of your phones.
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 91).
Note:
When you have activated ring alone but deactivated the personal call rout-
ing for a phone in parallel, an incoming call is not acoustically but only vis-
ually signalled.
Activating/deactivating ring alone
Press the function key for
➔
Function is activated/deactivated, LED on the function key is switched on/off.
Locking/Unlocking your phone
You need to leave your desk and want to ensure that no-one can alter your
phone's settings, look at your private data, or make calls from your phone.
You can lock your phone with a 2 to 10-digit PIN (for more information on
the PIN, see chapter "Changing the PIN", page 83).
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 91).
Mitel 6920 SIP
eud-1763/1.0 – R5.0 HF1 – 08.2017
Ring Alone
on/off.
Phoning
55
Hide quick links:
Advertisement
Table of Contents
