Mitel 6920 SIP Manual page 19

Function key
Key T3-T20 Empty
Key S8-S18 Empty
Mitel 6920 SIP
eud-1763/1.0 – R5.0 HF1 – 08.2017
Function key configuration (default key
setting) - Overview
The Mitel 6920 SIP phone on the MiVoice Office 400 com-
munication system are delivered with the default function
key configurations summarized in the following table. Note
that your system administrator might change the default
configuration and your phone configuration might therefore
differ from the default configuration.
Mitel 6920 SIP
Key T1 Personal Line 1
Key T2 Personal Line 2
Key S1 System menu
Key S2 Call forwarding menu
Key S3 Take (pick up own call)
Key S4 Empty
Key S5 Call routing menu
Key S6 Phone lock on/off
Key S7 Request a callback
Alphanumeric keyboard - Overview
The alphanumeric keyboard has a dialpad with digits from 0
through 9, a * key, and a # key. Of these, keys 2 through 9
contain letters of the alphabet. These dialpad keys can be
used for entering digits, password, text, and special charac-
ters, and also for quickdial. You can use the alphanumeric
keyboard to dial a phone number to make a call and to
press keys as required by an Interactive Voice Response
(IVR) system. Press the relevant key repeatedly until the
character you want is displayed.
1)
Note that the actual key configuration depends on which key-
pad is used.
Mitel 6920 SIP if defined as free
seating phone
Personal Line 1
Personal Line 2
Empty
System menu
Free seating: Log in/ Log out
Request a callback
Empty
Empty
Empty
Empty
Empty
1)
19