Mitel 6920 SIP Manual page 46

Phoning
Call transfer with prior notice (you are in a call):
1. Press the
2. Enter the call number of the second call party and press the
press the corresponding busy lamp field).
➔
3. Wait until the person has answered the call.
➔
4. Announce the call party.
5. Put the handset on-hook.
➔
Call transfer without prior notice (you are in a call):
1. Press the
2. Enter the call number of the second call party and press the
press the corresponding busy lamp field).
➔
3. Wait for the first ring tone.
4. Put the handset on-hook.
➔
➔
Note: You can change the procedure by first starting an enquiry call before call trans-
fer.
Take (pick up own call)
You want to transfer a call from one phone to another without interrupting
the connection (for example, from a desk phone to a cordless phone).
The take function can be used to transfer calls between your phones.
Requirements: You are using the one number user concept (see chapter
"One number user concept", page 8).
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 91).
46
Xfer softkey.
The second call party is called, the first call party is put on hold (
played, LED of the line key flashes).
If the second user does not answer, you can cancel the second call using
the softkey Cancel
Your first call partner and the other person are now connected with each
other.
Xfer softkey.
The second call party is called; first call party is put on hold.
The other party is then called directly by your first call partner.
Recall: If the other party does not answer, the call comes back to your
phone.
and recommence the first call by pressing
Dial softkey (or
is dis-
Pick up.
Dial softkey (or
Mitel 6920 SIP
eud-1763/1.0 – R5.0 HF1 – 08.2017