Mitel 6920 SIP Manual page 58

Phoning
• As long as you do not have your own phone or are not logged on to a
Free Seating phone, your caller will obtain either the busy signal or be
forwarded to a preconfigured destination, depending on the system
configuration.
• The call list display type
call list", page 68) is not available for free seating phones.
Log in free seating:
Press the
Enter phone number and PIN and confirm with the
➔
You are now logged in and can use the free seating phone with your personal
settings. The LED on the function key lights up.
Note: The default PIN setting '0000' is not accepted (for more information on the PIN,
see chapter "Changing the PIN", page 83).
Log out free seating:
1. Press the
➔
2. Depending on the system configuration, enter the PIN and confirm with the
OK
➔
Note: You are automatically logged off if your system administrator has set up an auto-
matic logoff process.
Hotline
The hotline is typically used for lift phones, emergency phones, or for baby
alarms or hotline in the hospitality/hotel branch.
A user requires help and picks up the handset or presses the loud-
speaker/headset key. The user is automatically routed to the preconfig-
ured hotline destination number stored in the MiVoice Office 400 commu-
nication system. The person responsible answers the call and is con-
nected with the user seeking help.
Alarm cancellation delay: Your system administrator can set a delay (1-
60 seconds, depending on the Mitel system phone). During this delay the
user can enter another call number in order not to trigger a call on the hot-
line destination number. If the user does not dial another phone number
58
Free Seating: Log in/out
Free Seating: Log in/out
The display with the call number is displayed.
softkey.
You are now logged off; the free seating phone is now available again to
other users.
Picture ID (see chapter "Editing options for the
softkey.
softkey.
OK softkey.
Mitel 6920 SIP
eud-1763/1.0 – R5.0 HF1 – 08.2017