Emerson RTS FQ Operating Manual page 69

User Instructions
Part Number IOM – 87376-7
Display Overview:
1.
2.
17.1.2
Display of binary inputs: A set input is represented by 1.
Figure 63
Display Overview:
1.
2.
17.1.3
Display of analogue values: Input 1 (In1) is used by the positioner as the setpoint; Input 2 (In2)
serves as an external value for the optional PID controller. In the analogue output (out), only
the control signal is shown, regardless of whether the output current actually flows or not
(interruption of the current loop).
Figure 64
Display Overview:
62
Ouput Number
Signal (0=LOW; 1=HIGH)
Status - Binary Inputs
Binary Inputs Display
Input Number
Signal (0=LOW: 1=HIGH)
Status - Analogue Values
Analogue Values Display
July 2016, Rev 1.0