Emerson RTS FQ Operating Manual page 55

User Instructions
Part Number IOM – 87376-7
48
Menu Sub Menu
Item Item
23: Lock Open
28: Lock Open
Poss. Setting
With activated (switched) signal, the actuator is
19: Block
locked for operation also in local mode.
20: Contoller
Positioner lock
lock
21: Release The actuator may be operated only with a
Local switched signal.
22: Block
As Release Local but active low
Local
Trigger lock OPEN (in LOCAL and REMOTE
mode). Actuator moves with the highest priority
to OPEN; command continues internally active
after reaching the end position OPEN. Dropping
only with LOCK OFF, Supply OFF or operating
mode OFF.
Trigger lock CLOSED (in LOCAL and REMOTE
mode). Actuator moves with the highest priority
24: Lock to CLOSED; command continues internally active
Closed after reaching the end position CLOSED. Dropping
only with LOCK OFF, Supply OFF or operating
mode OFF.
25: Lock Off Drop the lock
Trigger the Fail-safe function in all operating
26: Fail-safe
modes (only functional in fail-safe actuators).
27: Fail-safe
As Fail-safe but active low
inv.
As Lock Open but active low
inv.
29: Lock
As Lock Open but active low
Closed inv.
30: Lock Off
As Lock Off but active low
inv.
Approach intermediate position 1 (P8.1) in
31: REMOTE mode (fix position approach). There is no
Intermediate repositioning upon reaching the intermediate
position 1 position within the hysteresis (see P8.6) Higher
priority than intermediate position 2, 3 and 4.
32:
As intermediate position 1 but with higher priority
Intermediate
than intermediate positions 3 and 4.
position 2
33:
As intermediate position 1 but with higher priority
Intermediate
than intermediate position 4.
position 3
34:
As intermediate position 1 but with lowest
Intermediate
priority.
position 4
35: Approach emergency position (P 8.5). As
Emergency intermediate position 1 but with higher priority
position than intermediate positions 1, 2.
July 2016, Rev 1.0
Notes/Comments