Backend Server Register Information - Queclink GL300 Manual

GL300 @Tracker Air Interface Protocol
3.2.3.

Backend Server Register Information

The command AT+GTSRI is used to configure the backend server information that the terminal
reports to and the report mode that defines the communication method between the backend server
and the terminal.

AT+GTSRI=
Example:
AT+GTSRI=gl300,4,,,116.226.44.17,9001,116.226.44.16,9002,+8613812341234,0,1,,,,,0003$
Parameter
Password
Report mode
Reserved
Buffer enable
Main server IP/domain
name
Main server port
Backup server IP
Backup server port
SMS gateway
Heartbeat interval
SACK enable
SMS ACK Enable
Quick Link Enable
Reserved
Reserved
Serial number
Tail character

<SMS ACK Enable>: This defines whether the ACK confirmation should respond by SMS
when the command was sent by SMS.
 0: the device will send the ACK confirmation with the mode configured by the
<Report Mode>.
 1: the device will send the ACK confirmation by SMS to the phone which sent the
command by SMS.

<Quick link Enable>: This defines whether the device should establish TCP connection under
certain condition.
 0: disable.
 1: The device should establish TCP connection immediately when a call is coming.
This feature will be valid only when the report mode is set as TCP long connection.
The acknowledgement message of AT+GTSRI command:

+ACK:GTSRI,
TRACGL300AN001
Length (byte) Range/Format
4 – 6 '0' – '9', 'a' – 'z', 'A' – 'Z'
1 0 – 5
0
1 0|1|2
<=60
<=5 0 – 65535
<=15
<=5 0 – 65535
<=20
<=3 0|5 – 360min
1 0|1
1 0|1
1 0|1
0
0
4 0000 – FFFF
1 $
Default
gl300
0
1
0
0.0.0.0
0
0
0
0
0
$
- 16 -