Page 2
TRACGL300MT001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers. Queclink has not undertaken any independent search for additional relevant information, including any information that may be in the customer’s possession.
GL300 Manage Tool User Guide Contents Contents ............................2 1. Revision history ..........................4 2. GL300 Manage Tool Interface ...................... 5 2.1. System Requirements ......................5 2.2. COM Setting ........................6 2.3. Quick Setting Wizard ......................6 2.4. Professional Setting Windows ..................... 7 2.4.1 Title Bar ........................
Page 4
GL300 Manage Tool User Guide 3.2.19 Set the parameters of Network Select ..............37 3.2.20 Set the parameters of Voice Monitor ..............38 3.2.21 Set the parameters of Temperature Alarm .............. 39 3.3. Read/Save All Configuration ..................... 40 3.4. Load/Execute All Configuration ..................41...
(These messages can also be sent by SMS or GPRS ). The administrators can also use the manage tool to configure GL300 before selling. But it is strongly recommended to establish a backend server and implement the way to control GL300 by SMS or GPRS.
GL300 Manage Tool User Guide 2.2. COM Setting Select the COM port, input the password “gl300”, and the main window will display. 2.3. Quick Setting Wizard The quick setting wizard gives a basic setting for device. If you want use more functions of GL300, please change to enter professional setting mode.
GL300 Manage Tool User Guide 2.4. Professional Setting Windows Menus Toolbar Command Browser Command Operation Space Title Bar Statu 2.4.1 Title Bar Title Bar indicates current operational command title. 2.4.2 Menus It include “Start”, “Tool”, “Help” menu in menus. 2.4.2.1 Start Menu Start menu include “COM Settings”.
Page 9
GL300 Manage Tool User Guide [Operation Log]: It is used to display/hidden the operation log. Operation [Options]: It is used to set the basic setting of manage tool. “Basic Options” include startup setting options and log save option. “Advanced Options” include COM settings and other settings.
Page 10
GL300 Manage Tool User Guide 2.4.2.3 Help Menu Help menu include “About” and “Diagnosis”. [About]: Select “About”. Then the following pop up window will display. “Tool Version” indicates the version of this manage tool. “Support Version” indicates the firmware which this manage tool used for.
GL300 Manage Tool User Guide This function is only for technology diagnosis when the device report data abnormally, please ignore it when it works normally. 2.4.3 Toolbar It include “COM Setting”, “Operation Log”, “Quick Setting Wizard”, “Real All Configuration”, “Execute All Configuration” , “Save All Configuration”, “Connect/Disconnect to COM”.
GL300 Manage Tool User Guide [Save All Configuration]: It is used to save all configurations in Command Operation Space to file. [Connect/Disconnect to COM]: It is used to Connect/Disconnect to COM manually. 2.4.4 Status Bar There is system status and current status in status bar.
Page 13
GL300 Manage Tool User Guide Google Link SMS Configuration GTGLM Network Select GTNTS Voice Monitor GTMON Temperature Alarm GTTEM 2.4.5.2 Command Operation Space Command Description Parameters Area Command Display [Command Description]: There is a short description for reference command. [Parameters Area]: Set/Read parameters of this command in this area.
GL300 Manage Tool User Guide 2.5. Operation Result Interface 2.5.1 Operation Successfully Interface Command read OK. Command send OK. 2.5.2 Operation Failed Interface There should be COM port connection problem if the fail reason is timeout. TRACGL300MT001 - 13 -...
Page 15
GL300 Manage Tool User Guide There should be COM port is occupied. Please close all other COM-related applications. Please change to correct device password if Password Error. There are some issues with this com, please check your com wire or port.
3. Operation Instruction 3.1. Device Configuration with Quick Setting Wizard The manage tool is developed based on the @Track Air Interface Protocol. Please refer to “GL300 @Track Air Interface Protocol” for detail. The quick setting wizard gives a basic setting for device. If you want use more functions of GL300, please change to professional setting mode.
Step_1: Set report mode, main server, main server port, and SMS gateway in this window. The meaning of these parameters, please refer to the “GL300 @Track Air Interface Protocol” for detail. Step_2: Click “Check if main backend server is available” to check if main server IP and port is valid in network.
Step_2 Step_3 3.1.4 Fixed Time Report Setting Step_1: Set check interval, send interval, discard no fix in this window. The meaning of these parameters, please refer to the “GL300 @Trak Air Interface Protocol” for detail. Step_2: Click “Next”. Step_1 Step_2...
GL300 Manage Tool User Guide 3.1.5 Send Command to Device Step_1: Click “Send Command”. Command GTBSI, GTSRI, and GTFRI will send to device. Step_2: If the settings download successfully, the result return OK. Click “OK” to exit the quick setting wizard.
GL300 Manage Tool User Guide 3.2. Device Configuration in Professional Setting Mode The manage tool is developed based on the @Track Air Interface Protocol. Please refer to “GL300 @Track Air Interface Protocol” for detail. Following is a general procedure to configure GL300 with manage tool.
Step_1: Select “Backend Server Register Information”, after that the parameters of GTSRI show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Quick Start Settings”, after that the parameters of GTQSS show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Global Configuration”, after that the parameters of GTCFG show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Auto-Unlock-PIN”, after that the parameters of GTPIN show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Protocol Watchdog”, after that the parameters of GTDOG show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Time Adjustment”, after that the parameters of GTTMA show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Non Movement Detection”, after that the parameters of GTNMD show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Function Key Setting”, after that the parameters of GTFKS show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Outside Working Hours”, after that the parameters of GTOWH show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Fixed Report Information”, after that the parameters of GTFRI show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Geo-Fence Configuration”, after that the parameters of GTGEO show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Speed Alarm”, after that the parameters of GTSPD show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Digital Input Port Setting”, after that the parameters of GTDIS show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Real Time Operation”, after that the parameters of GTRTO show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Transparent Data Transmission”, after that the parameters of GTDAT show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “White Call List Configuration”, after that the parameters of GTWLT show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Google Link SMS Configuration”, after that the parameters of GTGLM show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Network Select”, after that the parameters of GTNTS show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Voice Monitor”, after that the parameters of GTMON show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
Step_1: Select “Temperature Alarm”, after that the parameters of GTTEM show in Command Operation Space. Step_2: The command message which shall be sent to GL300 will be generated based on input and displayed here. Please note this command message can also be sent to GL300 through SMS or GPRS.
GL300 Manage Tool User Guide 3.3. Read/Save All Configuration Step_1: It is recommended to read all configurations from device before saving the configuration. Select “Read All Configuration””Read From Device”. Step_2: After read successfully, click “Save All Configuration” in toolbar. Step_3: Select a folder, and key in the name of configuration file, then click “Save” button.
GL300 Manage Tool User Guide 3.4. Load/Execute All Configuration Step_1: Before execute all configurations, please load the configuration file or set all parameters in commands. To load configuration file, please select “Read All Configuration” ” Load Configurations From File”. And then select the configuration file you needed.