Report; Position Related Report - Queclink GL300 Manual

GL300 @Tracker Air Interface Protocol

3.3. Report

3.3.1.

Position Related Report

3.3.1.1. General Position Report

+RESP:GTFRI: report of AT+GTFRI

+RESP:GTGEO: report of AT+GTGEO

+RESP:GTSPD: report of AT+GTSPD

+RESP:GTSOS: report after long press the function if the function key is enabled and the
mode is SOS mode.

+RESP:GTRTL: report of AT+GTRTO-RTL

+RESP:GTPNL: The first location after the device powers on.

+RESP:GTNMR: non movement is detected by motion sensor, according to the setting of
AT+GTNMD

+RESP:GTDIS: the status of digital input is detected being changed if the parameter
<Enable> is set as 1 in the command AT+GTDIS,

+RESP:GTDOG: the protocol watchdog reboot message.

+RESP:GTIGL:The location message for ignition on and ignition off.
Example:
+RESP:GTFRI,1A0102,135790246811220,,0,0,1,1,4.3,92,70.0,121.354335,31.222073,20090
214013254,0460,0000,18d8,6141,00,,20090214093254,11F0$
+RESP:GTFRI,1A0102,135790246811220,,0,0,2,1,4.3,92,70.0,121.354335,31.222073,20090
214013254,0460,0000,18d8,6141,00,0,4.3,92,70.0,121.354335,31.222073,20090101000000,04
60,0000,18d8,6141,00,,20090214093254,11F0$
+RESP:GTGEO,1A0102,135790246811220,,0,0,1,1,4.3,92,70.0,121.354335,31.222073,2009
0214013254,0460,0000,18d8,6141,00,,20090214093254,11F0$
+RESP:GTSPD,1A0102,135790246811220,,0,0,1,1,4.3,92,70.0,121.354335,31.222073,20090
214013254,0460,0000,18d8,6141,00,,20090214093254,11F0$
+RESP:GTSOS,1A0102,135790246811220,,0,0,1,1,4.3,92,70.0,121.354335,31.222073,20090
214013254,0460,0000,18d8,6141,00,,20090214093254,11F0$
+RESP:GTRTL,1A0102,135790246811220,,0,0,1,1,4.3,92,70.0,121.354335,31.222073,20090
214013254,0460,0000,18d8,6141,00,,20090214093254,11F0$
+RESP:GTPNL,1A0102,135790246811220,,0,0,1,1,4.3,92,70.0,121.354335,31.222073,20090
214013254,0460,0000,18d8,6141,00,,20090214093254,11F0$
TRACGL300AN001 - 52 -