Queclink GL300 Manual page 81

GL300 @Tracker Air Interface Protocol
Protocol version
Unique ID
Device name
Alarm type
Temperature
GPS accuracy
Speed
Azimuth
Altitude
Last longitude
Last latitude
GPS UTC time
MCC
MNC
LAC
Cell ID
Odo mileage
Send time
Count number
Tail character

<Last longitude>: The longitude of the last position. The format is "(-)xxx.xxxxxx" and the
value range is from "-180.000000" to "180.000000". The unit is degree. West longitude is
defined as negative starting with minus "-" and east longitude is defined as positive without
"+".

<Last latitude>: The latitude of the last position. The format is "(-)xx.xxxxxx" and the value
range is from "-90.000000" to "90.000000". The unit is degree. South Latitude is defined as
negative starting with minus "-" and north Latitude is defined as positive without "+".

<Alarm type>: The type of temperature alarm.

1: The current temperature lower than the low temperature threshold defined by
<Min temperature>.

2: The current temperature in setting temperature threshold range

3: The current temperature higher than the high temperature threshold defined by
<Max temperature>.

<Temperature>: The current temperature of the device.

+RESP:GTUPC:
Example:
+RESP:GTUPC,1A0102,135790246811220,,1,http://www.queclink.com/configure.ini,,20090
201000000,11F0$
Parameter
protocol version
TRACGL300AN001
6 XX0000 – XXFFFF,
X∈{'A'-'Z','0'-'9'}
15 IMEI
20
1 1|2|3
4 XX.X
1 0
<=5 0.0 – 999.9km/h
<=3 0 – 359
±XXXXX.X m
<=8
±XXX.XXXXXX
<=11
±XX.XXXXXX
<=10
14 YYYYMMDDHHMMSS
4 0XXX
4 0XXX
4 XXXX
4 XXXX
9 0.0 – 4294967.0Km
14 YYYYMMDDHHMMSS
4 0000 – FFFF
1 $
Length(byte) Range/Format
6
XX0000 – XXFFFF,
∈
X {'A' – 'Z', '0' – '9'}
$
Default
- 80 -