Checking Brake Pads And Discs Brake Pads; Replacing The Brake Pads - Discs 18 1 2 3 - Malaguti SPIDER MAX RS 500 Service Manual

CHECKING BRAKE PADS AND DISCS
BRAKE PADS
Check front and rear brake pads and discs for wear
every 2,000 Km.
• Visually check the thickness of the brake pads as shown
in the picture.
The minimum thickness of the brake pad lining should
not be thinner than 2 mm.
• Replace the brake pads in case their thickness is below
the allowed limit or they are damaged.
REPLACING THE BRAKE PADS
For instructions on how replacing the front and rear brake pads please refer
to pages 60 and 61.
DISCS
Check the discs for wear and replace if necessary (service limit 4.5 mm).
In case of abnormal wear or signs of scoring, carry out grinding.
F. 15
18 02/08
F. 16
F. 17