Malaguti SPIDER MAX RS 500 Service Manual page 76

UPPER SUBFRAME
• Release and remove the two screws (V) and their washers.
• Release and remove the screws (V2) and their washers.
• Separate and extract the upper subframe (1) from the two side subframes.
SIDE SUBFRAMES
• Release and remove the lower screw (M8) and its washer.
• Release and remove the lower screw (M10) and its washer.
• Release and remove the screws (V3) and their washers.
• Remove the side subframes.
NOTE - The left subframe can be removed together with its side stand.
CENTRAL ALUMINIUM FRAME
NOTE - The aluminium frame (4), is made up of the two symmetrical parts.
• Release (on both sides) the screws (V4) securing the aluminium frame to the rear
frame.
• Release the central screws (V2a) and remove the spacer between the two half-fra-
mes.
• Release the lower screws (V2b) and remove the spacer (A).
• Release and remove the upper screws (V6) with their washers and nuts. Moreover these
screws secure the headstock (B).
• Separate the two aluminium "half-frames".
V V
2
10 ± 15%
V
2b
60 ± 15%
V M
6 8
25 ± 15%
V
2a
10 ± 15% 60 ± 15%
V V
3 4
25 ± 15% 60 ± 15%
M
10
55 ± 15%
25 ± 15%
1
V
V
3
A
F. 196
V
2b
75 02/08
V
V
2
V
2a
4
2
V
4
3
V
3
M M
8 10
6
B