Tail Lights - Malaguti SPIDER MAX RS 500 Service Manual

• Release the screws (V4).
V
4
1,5 ± 15%
V
F. 106
• Keep the rear fairing
components far from heat
sources, in a clean place
where they cannot be
accidentally damaged.
F. 108
V
4 4
• Extract the entire fairing to-
gether with the tail lights.

TAIL LIGHTS

• Tail lights can be accessed by
removing the helmet compart-
ment and the rear fairing.
• Disconnect the wiring.
• Release the screws (V3).
• Remove the cable clamps (A).
• Remove the headlight
concerned.
While reassembling,
refit the cable clamps
as before.
The tail lights glass
cannot be replaced.
If it is broken, replace
the whole headlight.
50 02/08
F. 107
F. 109
V
3
A