Malaguti SPIDER MAX RS 500 Service Manual page 71

• Release and remove the
screws (V2).
• Separate the two housing
halves, taking care not to
let the two pistons fall.
V
2
20 ± 20%
F. 180
• Remove the dust seal (A) and the seal ring (B) in both the housing halves, taking care
not to damage their seats.
• Check that the pistons and their seats are in perfect conditions.
Always fit new seal
rings and dust seals.
Refit the pistons, the
O-Rings, the seal rings
and the dust seals,
lubricating with brake
liquid.
V
2
F. 182
• Remove the two pistons (D).
• Remove the two O-Rings (E).
E
F. 181
At the end of each operation on the braking SYSTEM, always check that:
• The brake liquid lines are not damaged, squeezed or twisted.
• The disc and the brake pads are not soiled with oil or grease.
• All the screws and couplings are properly tightened.
• There are no leaks from the couplings.
70 02/08
E
D
D