Malaguti SPIDER MAX RS 500 Service Manual page 37

SIDE STAND
SWITCH
• Release the screws (V2).
• Remove the switch (A).
V
2
5 ± 20%
F. 56
FUEL SUPPLY PUMP
• Disconnect the connector
(C - F. 57)
• The procedure to remove the
fuel supply pump (A) and its
float (B), can be understood
from the picture on the side.
• Check the conditions of the
gasket (C) and replace it, if
necessary.
• Carefully clean the mesh filter
(D).
NOTE - All of the information
on the pump can be
deducted by reading
the Manual "Injection".
V
A
C
F. 58
2
• Open the front fairing.
• Disconnect the connector (B)
and detach the whole wiring
(if necessary), after releasing
its clips.
NOTE - While assembling a
new complete wiring,
refit new clips, placed
and fixed as before.
V
2
A
D
B
36 02/08
B
F. 57
C