Malaguti SPIDER MAX RS 500 Service Manual page 62

• Remove the stop plate.
D
20 ± 20%
F. 146
• Extract the pads.
NOTE - It is possible to
remove and replace
the pads without
removing the brake
callipers from the
vehicle.
F. 148
• Extract the pins (B).
D
• Release the nut (D - F. 146).
• Remove the floating sup-
port (S) from the calliper
body, including the two
slide pins.
During reassembly,
lubricate the slide pins
must rubber gasket
grease.
61 02/08
B
F. 147
S
F. 149
B