Malaguti SPIDER MAX RS 500 Service Manual page 41

KEY
SWITCH
• Disconnect the seat opening
transmission cable (A).
• Disconnect the helmet com-
partment opening transmis-
sion cable (B).
Take care not to
damage the cables
during the operation.
Squeezing or cuts of
some of the fibres of
the cables imply their
complete
replacement.
• Disconnect the two-way con-
nector connected to the Im-
F. 71
mobilizer.
DASHBOARD
PANEL
• Release the screws (V2).
• Remove the dashboard
panel (A), releasing it from
the locking tabs.
F. 73
V
2
A
V
2
• The key switch (C) is fitted
by two nuts (D) and two "anti-
tampering" screws (V2), that
can be accessed from the
lower part of the switch body.
To disassemble the
key switch, use the
special insert: "Torks
B
t 30" for special
screws.
cod. 08606600
If the key switch is replaced, or all of the stored keys are lost, replace the
Immobilizer ECU as well, and store new keys. To store a third key, use the
"Master key" (cod. 09007000) (please refer: DIAGNOSTICS MANUAL of the
ELECTRICAL SYSTEM AND EMS INJECTION SYSTEM).
40 02/08
D
V
2
V
2
F. 72
C