Malaguti SPIDER MAX RS 500 Service Manual page 60

(FRONT BRAKE)
DISCS
• To separate the discs (D) from the front wheel,
release and remove the screws (V6) and the
washers (E).
V
6
11 ± 10 %
Check the discs (D) for wear and replace if
necessary (service limit 4.5 mm). In case of
abnormal wear or signs of scoring, carry out
grinding.
When reassembling the (right and left
brake) discs observe disc rotation
direction, which can be determined by
the position of the slots.
FRONT WHEEL
REASSEMBLY
When reassembling the wheel, observe
rotation direction, which can be determined
by the position of the spokes of the rim (see
previous pictures).
To reassemble the wheel, proceed as follows:
• Insert the wheel in the fork (in the proper direction).
• Insert the wheel spindle (B) and the spacer (B1).
• Insert the spacer (C).
Do not exchange the spacer (B1) with the
spacer (C).
Tighten the spindle (B) to the specified torque.
B
45 ± 15%
E
V
6
D
F. 137
C
F. 139
59
D F. 138
E
V
6
• Tighten the screw
(V1) of the wheel
spindle clamp.
V
• Refit the odometer
sprocket (pick-up)
(A) and secure it by
B
means of the screw
(V).
B
1
02/08
1
20 ± 15%
F. 140
V
V
10 ± 15%
F. 141
V
1
A